Spiral chute beneficiation fineness

Spiral chute beneficiation fineness

The fineness of spiral chute beneficiation is as follows: 1. Explain the price of the transfer point spiral chute, and the chute sorting includes the inclined flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Technical principles. The uniform slurry is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for sorting. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. Spiral Chute Beneficiation Fineness III. Advantages: 1. Stable, easy to operate, and wide concentration range. Tailings spiral chute. 2. The processing volume of mineral materials is large, with high enrichment ratio and high recycling rate. 3. It occupies a small area, consumes less water, has a simple structure, and does not require power. 4. Simple installation, easy operation, low investment, and fast returns. Spiral chute beneficiation fineness 4. Structural composition. The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass reinforced coal gangue, and is bolted together. The selection surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of light weight, firmness, and durability in consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, and the control is simple. The concentrator is freely placed on the cross (or tripod) of the support table. The uniform slurry passes through the feeding trough installed on the spiral groove head and slowly feeds onto the rotating groove surface for sorting. The tail end of the spiral groove is installed in a valve block type new product cutting groove, and the sorting equipment is divided into three types (or four types) of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that gathers and leads out the obtained multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore materials. 5、 The range gravity ash separation iron spiral chute is adopted. The spiral chute is suitable for the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Spiral chute beneficiation fineness Spiral chute beneficiation fineness

Spiral chute beneficiation fineness