The sorting process of spiral chutes

The sorting process of spiral chutes

The sorting process of spiral chute 1. Equipment description. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the spiral rotation movement of mineral slurry to achieve lightweight and heavy mineral separation. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Special spiral chute for coal washing plant, the sorting process of spiral chute is . 3、 Features This equipment can be used to separate iron, ferrotitanium, ferrochrome, pyrite, zircon ore, Rutile ore, monazite ore, phosphate rock, tungsten, tin ore, tantalum ore, niobium and other non-ferrous metal ores, rare mineral metals and non-metallic minerals due to gravity difference. This machine has the advantages of stable and easy control in the selection process, allowing for a wide range of ore concentration, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simplified installation, simple operation, low investment, and fast efficiency. The sorting process of the spiral chute is . 4. Structural composition. The fiberglass chute is composed of a feeding homogenizer, a cross (tripod), a feeding trough, a rotating trough, a selection trough, a gathering hopper, and a trough pillar. Attention to spiral chutes. 5、 The use of spiral chutes in the field is suitable for processing 0.6-0.03 millimeters or vein ore and this sand ore, but it is unfavorable for sorting when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin placer, tantalum niobium ore, bay and riverbank placer or placer gold, and so on. The sorting process of spiral chutes The sorting process of spiral chutes

The sorting process of spiral chutes