Jinqiang Equipment  Service PhoneService Phone:  +8619870423316

Service PhoneService Phone:+8619870423316

current location: home > News and information > Reselection of knowledge

Installation steps for re selected spiral chute

update date :2023-07-26 15:40:08Number of views: author:huang

Installation steps for re selected spiral chute

Installation steps for re selecting spiral chutes: Jiangxi spiral chute manufacturer. 1、 Overview: The beneficiation chute belongs to the slope flow separation process. The slurry is fed to a inclined chute or inclined surface, and under the push of water, the mineral particle group is loose and layered. The upper layer of minerals is light and quickly discharged from the outside of the chute, while the lower part of minerals with high specific gravity stagnate inside the chute or slowly discharge from the lower part. After being obtained separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and mineral processing, especially ideal for mining sand by the sea, river beds, sand banks, and streams. The equipment has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high production capacity, high efficiency, ultra-high enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Production principles. The evenly proportioned mortar is slowly fed onto the rotating groove surface through a feeding chute installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected variable mineral flows to converge and export differently. The transverse plane and slope of the curve of the fiberglass spiral chute vary greatly, and the applicable range is for the selection of fine particle materials. Step 3 of the installation of the 重选螺旋溜槽安装步骤 re selected spiral chute. Highlights and characteristics: 1. Stable, easy to control, with a relatively large concentration range. 2. The material production and processing capacity is large, with a high enrichment ratio and a high probability of recovery. 3. The area is not occupied much, consumes less water, has a simple structure, and does not require power. 4. Easy installation, simple operation, low investment, and quick returns. Installation steps of gravity concentration spiral chute 重选螺旋溜槽安装步骤 IV. According to the particle size of processed ore materials, the chute can be divided into three types: (1) coarse chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm., Installation steps of gravity concentration spiral chute (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size < 0.074 mm. 5、 Application field. The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Installation steps for re selection spiral chute 重选螺旋溜槽安装步骤 Installation steps for re selection spiral chute

Installation steps for re selected spiral chute
Product Center