Rough selection of sandy kaolin spiral chute

Rough selection of sandy kaolin spiral chute

Sand kaolin spiral chute rough selection. 1、 Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic minerals due to its low environmental pollution and low cost. The spiral chute is one of the gravity sorting machines, with a structural characteristic of a cubic parabolic cross-section. It is used to process finer particle sizes of -0.2mm, and does not require flushing water during the sorting step. Fine, medium, and tailings are segmented at the bottom of the chute. 2、 The working principle is to select manganese through a spiral chute, and the mineral separator of the spiral ore machine is freely placed on a cross (or tripod) on a support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. sandy kaolin spiral chute rough selection 3. Advantages: 1. Stable, easy to operate, and large density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. The spiral chute roughing of sandy kaolin is . 4. According to the Granularity of the processed ore material, the chute can be divided into three categories:. (1) Coarse grained spiral chute, with a maximum particle size of 2-3mm or more for feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare ore metals and non-metallic ore bodies with gravity difference from 0.3-0.02mm fine materials. Rough selection of sandy kaolin spiral chutes Rough selection of sandy kaolin spiral chutes

Rough selection of sandy kaolin spiral chute