Jinqiang Equipment  Service PhoneService Phone:  +8619870423316

Service PhoneService Phone:+8619870423316

current location: home > News and information > Reselection of knowledge

Cross section of spiral chute concentrate outlet

update date :2023-07-26 15:41:04Number of views: author:huang

Cross section of spiral chute concentrate outlet

Spiral chute concentrate outlet profile diagram 1, explanation. The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the separation indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Production principle: Spiral chute desliming principle. The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. 螺旋式溜槽精矿出口剖面图 spiral chute concentrate outlet profile. 3、 Characteristics This product is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphorus ethylene, tungsten ore, sand tin, tantalum, niobium ore and other non-ferrous metal, rare metal and non-metallic ore bodies with density and specific gravity difference from 0.3-0.02MM fine materials. This equipment also has advantages such as stable and easy operation in the selection process, a wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, strong processing ability, easy installation and operation, low investment, and quick effectiveness. Spiral chute concentrate outlet profile drawing 螺旋式溜槽精矿出口剖面图 IV. Structural composition, fiberglass chute is composed of feeding homogenizer, cross (tripod), feeding trough, rotating trough, selection trough, gathering hopper, and trough support. 5、 Scope of utilization. Spiral chutes are suitable for processing 0.6-0.03mm and vein ore or ore sand, but high mud content is unfavorable for sorting. Nowadays, it has been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and river sand mines, as well as sand gold mines. Spiral Chute Concentrate Outlet Profile Map 螺旋式溜槽精矿出口剖面图 Spiral Chute Concentrate Outlet Profile Map

Cross section of spiral chute concentrate outlet
Product Center