Jinqiang Equipment  Service PhoneService Phone:  +8619870423316

WeChat/WhatsApp:+8619870423316
Service PhoneService Phone:+8619870423316

current location: home > News and information > Reselection of knowledge

Attention to spiral chutes

update date :2023-07-26 15:41:13Number of views: author:huang

Attention to spiral chutes

Spiral chute, note 1, description. Due to its low environmental pollution and low cost, gravity separation is widely used in the beneficiation of metal mines and non ferrous metal mines. The fiberglass spiral chute is a type of gravity beneficiation machinery, with a cubic parabolic shape in the cross-section. It is suitable for handling finer particle levels of -0.2 millimeters. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to obtain fine, medium, and tailings. 2、 Use a method to make the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to send the ore sand to the top two inlet ports of the spiral. The ore sand slurry enters to increase water and adjust its density. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow rate, resulting in differences in gravity, particle size, and shape of the sand ore, By separating the ore from the sand through the influence of the gravity and centrifugal force of the swirling flow, the concentrate enters the beneficiation hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. Attention to the three characteristics of the 螺旋溜槽注意 spiral chute: the square warehouse wall mounted spiral chute. This machine is applicable to sorting iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous gold ore bodies with specific gravity of 0.3-0.02mm fine materials. This equipment has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, very high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simple installation, convenient operation, small investment, and quick results. Pay attention to the structure of a bidirectional spiral chute. The spiral chute is composed of six parts, including a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding groove installed at the beginning of the rotating groove for selection. The bottom of the rotating groove is equipped with a valve block type new product acquisition groove, which allows the sorted new products to be divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports the selected variable mineral flows. The cross section and slope of the curve of the fiberglass chute are particularly suitable for the selection of fine particle materials. The gravity ash separation iron spiral chute, V. The range of application of the glass fiber reinforced plastic spiral chute is suitable for the separation of fine particles of iron, titanium iron, chromium iron, sulfur iron, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with completely Density contrast. Attention for spiral chute: 螺旋溜槽注意 Attention for spiral chute

螺旋溜槽注意 Attention to spiral chutes
Product Center
Phone/WhatsApp:+8619870423316