Silicon carbide spiral chute manufacturer direct sales

Silicon carbide spiral chute manufacturer direct sales

Silicon carbide spiral chute manufacturer direct sales 1. Description of the beneficiation chute, including the slope flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be aggregated and exported. The cross section of the spiral concentrator and the change in slope of the curve are very suitable for the selection of fine-grained ore materials. Direct sales of silicon carbide spiral chute manufacturers 3. Characteristics 1. Stable sorting process and easy operation 2. Large range of feed density is allowed 3. Ultra high enrichment ratio and high recovery rate 4. Small area occupied and low water consumption 5. Simple structure without power 6. Large processing capacity 7. Simple installation and simple operation 8. Low investment and quick results. Silicon carbide spiral chute manufacturers direct sales 4 The structural composition of the fiberglass chute consists of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment selection trough, a product gathering hopper, or a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), connected together by screws, and the rotating groove has a pre designed durable wear-resistant layer on the selected surface. It also has the advantages of light weight, durability, and durability in using consumer goods. Above the spiral groove is a multi tube feeding homogenizer that screens ore evenly, making it easy and convenient to operate. The sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface by installing the feeding groove at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type new equipment to cut the groove and classify the selected new products into three categories (or four categories) radially according to grade. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multi head ore flows to converge and lead out separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the selection of fine-grained ore. 5、 Applicable field The spiral concentrator is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density ratio difference. Silicon carbide spiral chute manufacturer direct sales Silicon carbide spiral chute manufacturer direct sales

Silicon carbide spiral chute manufacturer direct sales