Tailings spiral chute

Tailings Spiral Chute 1. Equipment Introduction: A gravity beneficiation machine used for separating light and heavy minerals through continuous centrifugal force during the rotary spiral movement of mortar. 2、 Use a method to make the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to send the ore sand to the top two inlet ports of the spiral. The ore sand slurry enters to increase water and adjust its density. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow rate, resulting in differences in gravity, particle size, and shape of the sand ore, By separating the ore from the sand through the influence of the gravity and centrifugal force of the swirling flow, the concentrate enters the beneficiation hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. tailings spiral chute 3. Advantages and characteristics: 1. Extremely high efficiency, high recycling rate, and correct screening of ore; 2. No power required; 3. Small weight, rust proof, durable, wear resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Tailings spiral chutes 4. According to the particle size of the processed ore, the chutes can be divided into three types: (1) Coarse particle spiral chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Tailings spiral chute Tailings spiral chute