Jinqiang Equipment  Service PhoneService Phone:  +8619870423316

Service PhoneService Phone:+8619870423316

current location: home > News and information > Reselection of knowledge

Slow flow spiral chute

update date :2023-07-26 15:43:26Number of views: author:huang

Slow flow spiral chute

Slow flow spiral chutes 1. Introduction: Spiral chutes summarize the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and beneficiation centrifuges. After relevant scientific research organized by the Ministry of Metallurgy, and appraisal conducted by departments such as design, school, and beneficiation company, they have been recognized as having superior mechanical performance and advanced sorting indicators, and have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron, ferrotitanium, chromite ore, pyrite, zircon ore, Rutile, monazite, phosphate rock, tungsten sand, placer tin, tantalum niobium ore, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal ore bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02mm. 2、 Operating principle: The spiral concentrator does not need to be restricted to placing the mineral separator on the cross (or tripod) of the support table. The same slurry is slowly fed to the rotating groove surface through the feeding groove on the spiral groove head, and sorting is carried out. The bottom is equipped with a valve block type product selection slot, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The transverse surface of the spiral chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 慢流速螺旋溜槽 Slow Flow Spiral Chute III. Advantages and Features 1. High efficiency, high recovery rate, and correct screening of minerals; 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. Slow flow spiral chute 慢流速螺旋溜槽 4. The structure of the spiral concentrator consists of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove support. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Slow Flow Spiral Chute 慢流速螺旋溜槽 Slow Flow Spiral Chute

Slow flow spiral chute
Product Center