The Separation Process of Mineral Slurry in Spiral Chutes

The Separation Process of Mineral Slurry in Spiral Chutes

The sorting process of mineral slurry in a spiral chute: 1. Explain that the chute sorting includes an inclined flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. The Separation Process of Mineral Slurry in a Spiral Chute 3. Features 1. Stable and Easy Control of the Separation Step 2. Wide Range of Allowable Changes in Feed Concentration 3. High Enrichment and Recovery Rate 4. Small Floor Area and Low Water Consumption 5. Simple Structure, No Power Required 6. High Yield 7. Easy Installation and Operation 8. Small Investment and Rapid Effectiveness of the Separation Process of Mineral Slurry in a Spiral Chute 4 The fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. The Separation Process of Mineral Slurry in a Spiral Chute The Separation Process of Mineral Slurry in a Spiral Chute

The Separation Process of Mineral Slurry in Spiral Chutes