Precautions for spiral chutes

Precautions for spiral chutes

Spiral Chute Precautions 1. Product Introduction: A gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through a feeding chute installed on the rotating groove head for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the sorted products to be divided into three (or four) categories according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi-directional mineral flow. The transverse surface of the fiberglass chute and the slope change of the curve are very suitable for selecting fine-grained materials. Attention points 3: Features and advantages of the spiral chute: 1. Large scale and high processing output. Nowadays, mineral material processing requires scale efficiency as a whole to create benefits. 2. Fine granulation is used for the treatment of fine-grained mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the level of composite application of centrifugal force, equipment vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy consumption, reduce energy consumption and protect the environment, occupy small area and space, and consume less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Precautions for Spiral Chute: 4. The construction of a fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment acquisition chute, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. 5、 The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient density ratio difference. Precautions for Spiral Chute Precautions for Spiral Chute

Precautions for spiral chutes