Jinqiang Equipment  Service PhoneService Phone:  +8619870423316

Service PhoneService Phone:+8619870423316

current location: home > News and information > Reselection of knowledge

Application types of spiral chutes

update date :2023-07-26 15:40:19Number of views: author:huang

Application types of spiral chutes

Application types of spiral chutes. 1、 Equipment description: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the spiral rotation movement of mineral slurry to achieve lightweight and heavy mineral separation. 2、 Production principles. The spiral mineral separator is not limited to placing on the cross (or tripod) of the support table. The uniform slurry is slowly fed to the rotating groove surface through the feeding groove installed at the head of the spiral groove for sorting. A valve type product selection slot is installed at the tail, allowing the selection equipment to be divided into three (or four) categories according to grade along the radial direction. Adjust the orientation of the valve block to obtain the width of each device. The product gathering bucket is a concentric circular tube that distinguishes and densely draws out the intercepted multi-directional mineral flow. The transverse surface of the fiberglass spiral chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Application type 3, advantages and characteristics of the 螺旋溜槽应用类型 spiral chute: 1. High efficiency, high recovery rate, and correct mineral sorting; 2. No power required; 3. Small weight, rust proof, wear-resistant, and not easily corroded; 4. Low operating cost and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade. The friction formed by the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. The basic principle of spiral chutes is briefly described in the application type 螺旋溜槽应用类型 of spiral chutes. The application type 4 of spiral chutes is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove support. Application type of spiral chute V. Scope of application FRP spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochrome, pyrite, cassiterite, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth ore or other metal and non colored metal minerals with sufficient specific gravity difference. Spiral Chute Application Type 螺旋溜槽应用类型 Spiral Chute Application Type

Application types of spiral chutes
Product Center