Spiral chute rack

Spiral chute shelves. 1、 Product Introduction: A gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals. 2、 Technical principles. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product selection groove, which divides the selected equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to converge and lead out. The change in slope of the curve on the transverse surface of the fiberglass chute is particularly applicable for the sorting of fine-grained materials. spiral chute shelves. 3、 The special spiral concentrator has attracted special attention among many gravity concentrators due to its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear screening ore, no moving parts, convenient maintenance and management, large processing output per unit size and other characteristics. The equipment has a wide or flat groove surface, and the area where mineral mortar flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) particle sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200mm domestically, Ф The processing capacity of 1200mm four heads is about 4-6 tons per hour. Spiral chute shelves IV. Types. According to the Granularity of the processed ore materials, the chutes can be divided into three types: (1) Coarse grained chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 Which is the best choice for using spiral chutes for mineral processing in the field. The spiral chute is suitable for processing 0.6-0.03MM and this vein ore as well as ore sand, but it is unfavorable for sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on. Spiral chute rack Spiral chute rack