Spiral chute and ordinary chute

Spiral chute and ordinary chute

Spiral Chute and Ordinary Chute 1. Equipment Description: A gravity separation machine used for separating light and heavy minerals through the continuous centrifugal force generated by mineral mortar in spiral motion. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. spiral chutes and ordinary chutes 3. Characteristics This machine is suitable for separating fine and small materials with Granularity of 0.3-0.02MM from iron ore, ilmenite ore, chromite ore, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalite, tantalite and niobium ore, and other nonferrous metals, rare mineral metals and this nonferrous metal mineral body with gravity difference. This product also has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recycling rate, small land area, small water consumption, simple structure, no power, large production capacity, easy installation, simple operation, small investment, and quick effectiveness. Spiral chutes and ordinary chutes can be divided into three categories based on the particle size of the ore being processed: (1) Coarse grained chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding and up to 100-200mm. (2) Sand chute, processing 2-3MM Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 Scope of use: FRP spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, placer tin, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth or other metal and non-metallic mineral materials with sufficient Density contrast. Spiral Chutes and Ordinary Chutes Spiral Chutes and Ordinary Chutes

Spiral chute and ordinary chute