Picture of lump coal spiral chute

Picture of lump coal spiral chute

Introduction: Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its low pollution and low cost. Fiberglass reinforced plastic chute is one of the gravity separation equipment, with a structural feature that the cross-section presents a cubic parabolic state, suitable for processing finer particle sizes of -0.2MM. During the selection process, do not add water for flushing, and divide the chute into sections at the end to select fine, medium, and tailings. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Image 3: Advantages and Features of the Spiral Chute for Block Coal: 1. Extremely high efficiency, high recycling rate, and correct screening of ore; 2. No power required; 3. Small weight, rust proof, durable, wear resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The structure of the fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering hopper, and a groove support. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Picture of lump coal spiral chute Picture of lump coal spiral chute

Picture of lump coal spiral chute