Service Phone: +8619870423316
Hydrocyclone equipment image：
Hydrocyclone equipment details：
1、 Introduction to Hydrocyclone:
Hydrocyclone is used to separate and remove heavy coarse particles, sludge and other chemicals in wastewater. Sometimes it is also used to dry with mortar. It is divided into two types: working pressure type and gravity type, often made of circular cylindrical buildings or metal hoses. The water enters from the upper end of the building (or metal hose) along the broken line by working pressure or gravity. Under the effect of Centripetal force, the chemical substances of the compacted particles are thrown to the wall of the vessel and rotated downward to discharge with the generated concentrated liquid. The smaller particles of chemical substances rotate to a certain level, although they are discharged by a secondary upwelling vortex.
2、 Structure of Hydrocyclone:
The upper end is conical and is equipped with a feeding tube on a cylindrical cylinder section that is tangent to the cylinder wall. The upper end of the cone is equipped with a management center overflow pipe connected to a part of the cylinder. The upper part of the overflow pipe is connected to the buffer room or immediately connected to the external pipeline to discharge the overflow type. Equipped with a sand settling nozzle at the bottom of the cone to discharge coarse sand. In order to better reduce wear, wear-resistant rubber or metal composites such as Gabbro, cast stone and carbon carbon composites can be lined on the wall of the feed mouth, grit nozzle and cylinder body.
3、 Working principle of Hydrocyclone group:
When the coal slurry is fed into the drum by the slurry pump (or slope) along the tangent direction through the ore feed pipe at a certain working pressure (generally 0.5~2.5 kg/cm) and water flow (about 5~12 m/s), the coal slurry will rotate along the material bed at a rapid rate, resulting in a very large Centripetal force. Under the effect of Centripetal force and gravity, the coarser and heavier mineral particles are thrown to the wall of the vessel, and move down the trajectory of the vortex line to keep fit, and are discharged from the nozzle below the cone, while the finer mineral particles generate an internal spiral upward coal slurry flow in the cone management center and water, and are discharged through the overflow pipe. Compared with the mechanical equipment classifier, the Hydrocyclone group has the following advantages: no fitness components, simple structure; The production capacity of the enterprise is large, accounting for a small proportion of the total area; Hierarchical efficiency (up to 80%~90%), fine particle size distribution; The engineering cost is low and the raw material consumption is low.
4、 Hydraulic power is mainly used for the following tasks according to the process:
1. Grinding and grading of a segment of cable digital TV
2. Grinding and grading of two-stage cable digital TV
3. Titanium concentrate regrinding and grading
4. Desliming of raw ore before and after beneficiation
5. Embankment and backfill of tailings pond
The Hydrocyclone website provides the working principle and manufacturer model information of the Hydrocyclone group. Learn more about the working principle and manufacturer model of the Hydrocyclone group and other product information. Welcome to consult Jinqiang Mining Equipment. Hydrocyclone manufacturers sell it directly at a low price. Welcome to buy it.
Hydrocyclone Technical Parameter：
Hydrocyclone Related products